Oricom W1 User Manual

W1 Series Water resistant DECT Cordless phone Keep this user guide for future reference

10Making an external call Your phone allows you to dial out a phone number in various ways. Normal dialling 1. Press and wait for the dial

11The call timer will be displayed a short while after your call is connected. It shows the duration of the call. This timer is shown in minute

12During a call, you will hear a loud tone the two loud beeps periodically to notify you of another incoming call. If you wish to answer this ca

132. If there is caller name in the CID record, the first 8 characters are displayed for you to edit. If no caller name is available, you will

143. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again. 4.

156. Press OK to confirm number change. Repeat steps 1 to 6 to edit another record. Deleting a phonebook record 1. During standby mode, pres

166. Press OK to confirm your selection. will turn on if the handset ringer is turned off. Base Ringer Melody & volume 1. Press PROG

173. Before you enter the PIN, press and hold on the base for 2 seconds until a registration tone is emitted. The base is now in the regist

18OTHER FEATURES Key lock Press and hold during standby to lock the keypad. appears whenever keypad is locked. When the keypad is locked,

19MULTI-HANDSET OPERATION You can use these useful features if you have 2 or more handsets registered to the base. Answering an internal call

2Content Pack Contents ... 3 IMPORTANT SAFET

20During the conference call, pressing CONF will put the external line on hold and you can talk to the other handset in private. Press and hol

21NOTES FOR OPERATION IN NEW ZEALAND The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that

22WARRANTY INFORMATION This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does not extend to da

3OTHER FEATURES... 18 Key lock...

4IMPORTANT SAFETY INFORMATION • Avoid exposure of this telephone to moisture or liquid. • To prevent electric shock, do not open the handset or

5GETTING STARTED Key Layout ¿ / Ringer On-Off LCD Display Talk / Recall Redial CID / Scroll backward

6LCD display on the handset The handset is linked to the base Displays the current battery level. It scrolls during charging. Appear

7Basic steps to install This phone is not fully weather-sealed or waterproof. Its special construction provides

8Wall mounting the base and charger 1. Turn the base over. 2. Attach the mounting bracket to the base as indicated.

9charge. This is normal. A handset reaching a very low battery voltage level will go into sleep mode, displaying LOW BATT on the screen. It is g