Oricom S209 User Manual download pdf (Page 12)

Call

- 8 -

3. Place the handset on the charging cradle. Charge for 14

hours before initial use.

CHECKING THE BATTERY LEVEL

The battery icon displays the current battery level.

= 100% full

= 60% full

= 30% full

= Empty. Require charging.

Your handset may power down shortly if it is not charged after the battery is empty. If you are on the phone while the battery is nearly

empty, you will hear warning tones. Your call maybe cut off shortly after the warning.

WALL MOUNTING THE BASE

Please use the following wall mount template to locate and install the mounting pins/screws if you prefer to wall mount your base unit.

The dimensions are shown in millimeters (mm).

1. Insert screws (not supplied) into the wall.

The recommended mounting screws are “Philips Pan Head Self-Tapping Screws” with diameter 4mm and length 20mm.

The diameter of the screw head and the screw should not be greater than 12mm and 5mm respectively.

2. Push the locking tabs of the wall mount bracket into the mounting holes at the back of the base unit.

3. Align the mounting holes of the wall mount bracket with the wall posts.

NOTE: Handset may get warm during initial charge. This is normal. The handset may take a few seconds to

ower u

CAUTION:

Other wall mounting methods are not recommended and may damage the product.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 53 54

No comments

Oricom S209 User Manual Page 12