Oricom S209 User Manual download pdf (Page 13)

Call

- 9 -

4. Slide the base unit down into place.

GREETING YOU WITH “HELLO”

At first start up, your handset welcomes you with a “Hello” message. At the “Hello” screen, set the country to start using the phone.

The Country menu is only available in models that support multiple-country settings. If the model has only one country setting, the “Hello” message will

not be available and therefore you will not need to select the country setting before use

Selecting your country

It is necessary to select the correct country for the phone to work properly according to your country’s standards.

At the “Hello” screen,

1. Press

to navigate to your country.

2. Press

to confirm. Your phone is now ready to use.

To re-configure your country setting, see page 44.

WHAT IS STANDBY MODE?

Your phone is in standby mode when it is idle. The standby screen displays the handset name, the date and time, the signal icon, and

the battery icon.

REGISTERING YOUR HANDSET

Registration allows communication between your base unit and handset(s). If your handset cannot communicate with its base, you will

not be able to make any call or use some of the functions and features on the phone.

To register your handset to an additional base unit, see Registering your handset(s) with additional base on page44.

If your handset displays NOT REG, follow the steps below to register your handset.

1. Press

REG

. REGISTER shall be highlighted.

2. Press

to confirm selection.

3. Select the base number you want. Press

. This base number will be assigned to the base unit you are about to register

to.

4. Enter the system PIN. Use

DELETE

to make correction.

5. Press

to confirm. Your handset starts searching for the base.

6. Press

PAGE

on the base unit for 4 seconds. The registration process shall be completed within 30 seconds. If registration

is successful, the signal icon

displays steadily. If registration failed, repeat the above procedure.

CHECKING THE SIGNAL STRENGTH

The signal icon displays the link status between your handset and the base unit.

Steady signal icon: Your handset and base unit are linked. They can communicate.

Flashing signal icon: Your handset and base unit have lost link. They are not able to communicate. Take your handset closer to the

base unit to reconnect the link.

NOTE: Your base can register up to 9 handsets. After registering 9 handsets, your base unit registration

memory is full. If you attempt to register an additional handset, you will hear a reject tone from the base.

The registration process will be aborted.

NOTE: Your S209 Twin pack handsets are registered at the factory. Follow the procedure below only if you

have bought extra handsets or you have de-registered a handset.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 53 54

Comments to this Manuals

No comments

Oricom S209 User Manual Page 13

Comments to this Manuals

Related products and manuals for Mobile phones Oricom S209