Oricom PMR1200 User Manual download pdf (Page 13)

Operation

Turning the Unit ON/OFF

To Turn ON;

a. Press and hold the POWER button until the LCD screen

turns ON and displays the current channel.

To switch OFF;

b. Press and hold the POWER button until the LCD screen

turns blank.

Changing Channels

The PMR1200 has 40 available channels, to communicate with

other radio’s, it must have your radio tuned to the same channel.

a. Press the MENU button once, the current channel

number ashes on the LCD Screen.

b. Press the UP or DOWN button to select the desired

channel. The channel changes from 1 to 40, or vice versa.

c. Press the PTT button to conrm the channel setting.

These are paired with higher channels as output/input (1/31, 2/32,

etc.)

Check for local repeater activity before using these channels in

Simplex mode to avoid interference. Channels 9 and above are the

best choices for general use in Simplex mode.

You can nd more information about channels and frequencies by

visiting the Web site http://www.acma.gov.au

Note: Refer to the “Channel Table” section of this Owner’s Manual

for detailed frequency listing.

Setting the CTCSS sub-channel

Each channel has 38 sub-channels to let you set up group of users

within the same channel for more private communication. If you

have set the sub-channel, you can only communicate with other

radio users tuned to the same channel and sub-channel I.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Oricom PMR1200 User Manual Page 13